Coolers - OAW
Download Catalogue (1.35 MB)
Our OAW coolers are designed for a maximum working pressure of 300 psi. The most standard application for the OAW cooler involves a cold water circuit and a hot oil circuit. Fluids are not limited to oil and water however, see the Fluid Compatibility section in the OAW product literature for more information. Inlets and Outlets are clearly identified by the Olaer USA sticker affixed to the front of the unit. When in doubt, pour a liquid in one of the connections and note which connection it comes out of. This will be the inlet and outlet for one circuit (either oil or water). The other inlet should be located on the diagonal from the first inlet. Maximum cooling efficiency is achieved by cross flowing through the plates, the oil inlet and water inlet being located on a diagonal.
|
| |
Model Number |
Cooling Capacity (*hp) |
Connections |
A
(in) |
Weight
(lbs)
|
Volume
(sq. in)
|
OAW 14-10 |
2-7 |
3/4" SAE O-Ring |
1.4 |
1.4 |
15 |
OAW 34-20 |
6-33 |
1" SAE O-Ring |
2.3 |
9 |
74 |
OAW 34-40 |
20-69 |
1" SAE O-Ring |
4.1 |
15 |
149 |
OAW 46-40 |
21-94 |
1-1/4" SAE O-Ring |
3.9 |
13 |
200 |
OAW 46-60 |
23-142 |
1-1/4" SAE O-Ring |
5.7 |
18 |
300 |
OAW 61-40 |
27-98 |
1-1/4" SAE O-Ring |
3.9 |
19 |
271 |
OAW 61-60 |
53-152 |
1-1/4" SAE O-Ring |
5.7 |
27 |
406 |
OAW 61-80 |
79-198 |
1-1/4" SAE O-Ring |
7.4 |
34 |
542 |
OAW 95-40 |
50-150 |
1-1/2" SAE O-Ring |
4.1 |
44 |
427 |
OAW 95-60 |
63-161 |
1-1/2" SAE O-Ring |
6.0 |
59 |
641 |
OAW 126-60 |
84-259 |
1-1/2" SAE O-Ring |
6.1 |
79 |
856 |
OAW 126-80 |
138-274 |
1-1/2" SAE O-Ring |
7.9 |
97 |
1142 |
|
